PetMonPro September 3, 2013

From jcmg
Jump to: navigation, search

Record book


  1. Activities
    1. Configure the compatibility of SD CARD SHIELD on arduino MEGA
  2. Questions and answers
    • jorge.mind -> jcmg:
        • jcmg -> jorge.mind:
  3. Comments:
  4. Pending Activities:
    • Activity 1:
    1. Set up the hardware configuration.
    2. Set up the software configuration.
  5. Final report:
    • Activty 1 13:29: Arduino MEGA'S pins are not compatible with the SD CARD SHIELD, we connected the arduino MEGA to the SD CARD SHIELD by this way:
      1. We connected Pin 10 on the shield to Pin 53 on the Mega.
      2. We connected Pin 11 on the shield to Pin 51 on the Mega.
      3. We connected Pin 12 on the shield to Pin 50 on the Mega.
      4. We connected Pin 13 on the shield to Pin 52 on the Mega.
        • 34fr.jpg
    • We used the SD CARD Arduino's library but, we changed the variable value “chipSelect = 4” tho the 54 arduino MEGA's pin.
      1. Source: http://marcchambers.com/post/48675042923/connecting-the-seeed-studio-sd-card-shield-3-1-to-your
Personal tools
Namespaces
Variants
Actions
Navigation
Toolbox